product details
- case pictures
- uses
- advantages
- working procedure
- handling tip
- technical tips
- publications
- ordering info
- downloads
Implantology:
modellations for casting or scanning of
production of as well as connecting or fixing of single implant parts or segments
|
combined restorations:
- primary and secondary telescopic
|
advantages:
primopattern Gel and Paste stand out due to the following product characteristics:
- ready to use one-component-material, light cured and thixotrop
- perfectly aligned viscosity of Gel and Paste for quick and precise application
- stays where placed – does not run – therefore very economical
- easy control of the applied thickness
- long working time (> 20 min.) – short curing time (< 5 min.)
- cures in most conventional light curing units (320nm-500nm)
- polymerisation neutral and absolutely dimensionally stable with great fitting properties
- no distortion, high surface hardness and great strength
- light cured cases can be lifted off easily and stress free
- easy to grind with carbide burs or rubber polishers
- burns out cleanly and completely
- can be used in conjunction with conventional waxes or light cured wax (metacon)
-
does not contain MMA and peroxide and has no taste or smell
handling tip:
When the syringe is used with a lightly vibrating motion, the material becomes more flowable, when the vibrating motion is stopped, the Gel will stay as placed (thixotropic behaviour).
Slighten moisten your fingers and instruments with metatouch (IM200) before kneading the paste.
technical tips:
|
application:
For applying larger amounts of material at a time efficiently (i.e. for bars, pontics, etc.) use primopattern LC Paste.
Use primopattern LC Gel for the more delicate works that require less layer thickness. In cases with larger volumes of primopattern material, cover the outer surfaces with a thin layer of conventional modelling wax before investing. |
light curing:
primopattern cures in most conventional light curing units that supply a wavelength spectrum of 320nm-500nm.
Most suitable are the Metalight light curing units (primotec), as they are equipped with a special cooling system for most gentle polymerisation. average polymerisation times in light curing units equipped with: |
| Item | Product description | Item # | |
|---|---|---|---|
 |
primopattern LC Gel |
light cured universal modelling resin gel (5x3g) |
PA100 |
 |
primopattern LC Paste |
light cured universal modelling resin paste (30 g) |
PA200 |
 |
PE-case insert |
for two models (without case and models) |
PA501 |
